Kiln Firing Service - Inner West Sydney

Fast turnaround Kiln Firing Service in the Inner West Sydney!

Firing services take place at the Posy Studio located at 57 Denison St Camperdown. 

Depending on what you need to fire we have options for all needs. 

Please ensure you've read the Terms and Conditions below, before you book.

Full Shelf

Kiln shelf dimensions - 47cm diameter x 10 cm height 
If your work is over 15cm, it takes the space of two shelf storeys, and is charged as 2 shelves. 
Bisque 999° = $20 per shelf
Stoneware 1280° = $30 per shelf

Full kiln

Internal Dimensions - 52cm × 47cm
approx 4 shelves | 47cm diameter x 10cm height per shelf 
Bisque 990° = $65
Glaze Options
Earthenware 1100° = $70
Mid Fire 1220° = $75
Stoneware 1260°-1280° = $85


Terms and Conditions

For all firings

We provide the schedule for firing and ALL all kilns are packed by technicians. 

There is a first come first serve for anything other than a full kiln. 

We will only fire pieces made if you have ceramic experience and can provide us with information about the clay body / glazes ect. 

We do not guarantee you will have your items by a specific date, so give yourself plenty of time. 

Small items such as beads must be fired on a setter, provided by yourself, with items already loaded. 

Kiln misfires happen! We will run you through again free of charge. 

Kiln mishaps happen! We are not responsible if your piece, explodes, warps or is otherwise damaged as a result.

In the unlikely event your piece is dropped or damaged by a technician, or incorrectly fired through human error, we will not charge for firing, and offer credit of that amount, to remake and fire it for free. 

Kiln delays happen! We may move schedules back if needed. 

Concerned about a runny glaze? Make and put it on a setter. If your glaze runs and you didn’t provide a setter, you will be charged a kiln shelf cleaning fee of $25

If you put the wrong clay body into a firing and it melts, you will be charged a kiln shelf cleaning fee of $25

If your work catastrophically melts or explodes, you will be charged for any damage to the kiln, and may have to pay other potters for any damaged work. 

Glazes must not flash, or contain salts.

Please don’t get experimental with what you put in your body or glaze without telling us. It’s very dangerous and we need to vet each addition. 

Solid sculptures, or armatures are a no-no. And unfortunately we do not offer Raku Firings at this point.

To book a kiln firing follow this link and send us what you’re after.